Nstream Dual step by step

Sebulan yang lalu Syukur Alhamdulillah kalo emang udah rejeki ga akan kemana. Salah satu perusahaan optikal terkemuka di Jakarta yang letak Kantor dan Pabrik nya berjauhan menerima penawaran kami untuk masalah local -link nya. Karena kebutuhan pasar begitu besar dan serba cepat , karena tekhnologi juga yang berperan . Output Input data emang lebih cepat antar kantor dan pabrik nya setelah kami intstalasi RB 433 sisi Kantor dan RB 133 sisi Pabrik. Saya pake Nstream Dual karena kebutuhan bandwith local nya besar banget. Tahap demi tahap cara instalasi nya .

MikroTik devices:
I. SISI KANTOR
1.1. Enabling wireless cards 1 and 2:
[admin@MikroTik] > interface enable wlan1
[admin@MikroTik] > interface enable wlan2
1.2. Assigning IP address to the ethernet interface:
[admin@MikroTik] > ip address add address=192.168.1.1/24 interface=ether1
1.3. Creating bridge interface:

[admin@MikroTik] > interface bridge add
1.4. Adding ethernet interface to the bridge interface:

[admin@MikroTik] > interface bridge port add interface=ether1 bridge=bridge1
1.5. Setting wireless cards 1 and 2 to nstreme mode:

[admin@MikroTik] > interface wireless set wlan1 mode=nstreme-dual-slave
[admin@MikroTik] > interface wireless set wlan2 mode=nstreme-dual-slave
1.6. Creating nstreme dual interface and setting Tx and Rx radios and frequencies:
[admin@MikroTik] > interface wireless nstreme-dual add rx-radio=wlan1 tx-radio=wlan2
rx-band=5ghz tx-band=5ghz rx-frequency=5180 tx-frequency=5300
1.7. Adding nstreme interface to the bridge:
[admin@MikroTik] > interface bridge port add interface=nstreme1 bridge=bridge1
1.8. Checking the MAC address of the nstreme interface (in this example: 11:11:11:11:11:11):
[admin@MikroTik] > interface wireless nstremedual print
Flags: X disabled, R running
0 X name="nstreme1" mtu=1500 macaddress=11:11:11:11:11:11 arp=enabled
disablerunningcheck=no tx-radio=wlan2 rx-radio=wlan1 remotemac=00:00:00:00:00:00
tx-band=5ghz tx-frequency=5300 rx-band=5ghz rx-frequency=5180
ratesb=1Mbps,2Mbps,5.5Mbps,11Mbps
ratesa/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
framerpolicy=none framerlimit=2560

II. SISI PABRIK
2.1. Enabling wireless cards 1 and 2:

[admin@MikroTik] > interface enable wlan1
[admin@MikroTik] > interface enable wlan2
2.2. Assigning IP address to the ethernet interface:

[admin@MikroTik] > ip address add address=192.168.1.2/24 interface=ether1
2.3. Creating bridge interface:
[admin@MikroTik] > interface bridge add
2.4. Adding ethernet interface to the bridge interface:
[admin@MikroTik] > interface bridge port add interface=ether1 bridge=bridge1
2.5. Setting wireless cards 1 and 2 to nstreme mode:
[admin@MikroTik] > interface wireless set wlan1 mode=nstreme-dual-slave
[admin@MikroTik] > interface wireless set wlan2 mode=nstreme-dual-slave
2.6. Creating Nstreme dual interface and setting Tx and Rx radios and frequencies and setting the MAC address of the remote nstreme interface (in this example: 11:11:11:11:11:11 [step 1.8]):
[admin@MikroTik] > interface wireless nstreme-dual add rx-radio=wlan1 tx-radio=wlan2
rx-band=5ghz tx-band=5ghz rx-frequency=5300 tx-frequency=5180
remotemac=11:11:11:11:11:11 disabled=no
2.7. Adding nstreme interface to the bridge:
[admin@MikroTik] > interface bridge port add interface=nstreme1 bridge=bridge1
2.8. Checking the MAC address of the nstreme interface (in this example: 22:22:22:22:22:22):
[admin@MikroTik] > interface wireless nstremedual print
Flags: X disabled, R running
0 R name="nstreme1" mtu=1500 macaddress=22:22:22:22:22:22 arp=enabled
disablerunningcheck=no tx-radio=wlan2 rx-radio=wlan1 remotemac=11:11:11:11:11:11
tx-band=5ghz tx-frequency=5180 rx-band=5ghz rx-frequency=5300
ratesb=1Mbps,2Mbps,5.5Mbps,11Mbps
ratesa/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
framerpolicy=none framerlimit=2560
III. MikroTik Device 1
1.9. Setting the MAC address of the remote nstreme interface (in this example: 22:22:22:22:22:22 [step 2.8]):
[admin@MikroTik] > interface wireless nstreme-dual set nstreme1
remotemac=22:22:22:22:22:22 disabled=no

Selamat Mencoba ya ...GOOD LUCK !!